Pouyesh Sanat Gostar MelalPrivate Joint Stock Co. · Metallurgical consumables & aluminium products
Home / Cables
For transmission, distribution and installations

Aluminium Conductors & Cables

Bare overhead conductors, medium-voltage covered conductors, aerial bundled cable and low-voltage power cables with aluminium conductors, to ASTM, BS, DIN, IEC and other international standards. Full size tables for each type are sent on request.

Bare overhead conductors

AAC

All Aluminium Conductor

Stranded from 99.8 % pure 1350 aluminium wires in 1 to 6 concentric layers (7 to 127 strands). High conductivity for short spans at low and medium voltage. 13.3 to 2000 mm².

ASTM B231 · BS 215-1 · DIN 48201-5 · AS 1531 · BS EN 50182 · JIS C 3109
AAAC

All Aluminium Alloy Conductor

6101 or 6201 (Al-Mg-Si) alloy wires, 7 to 61 strands. Higher strength-to-weight ratio than AAC, good sag-tension behaviour and better corrosion resistance than ACSR; suited to high-voltage lines.

ASTM B399 · BS 3242 · DIN 48201-6 · AS 1531 · BS EN 50182
ACSR/GA

Aluminium Conductor Steel Reinforced

Galvanised steel core of 1, 7, 19 or 37 wires under aluminium layers. Steel-to-aluminium ratio chosen for the required strength and ampacity; core greasing available for corrosion protection.

ASTM B232 · BS 215-2 · DIN 48204 · GOST 839 · AS 3607 · BS EN 50182
ACSR/AW

ACSR with Aluminium-Clad Steel Core

Like ACSR/GA but with an aluminium-clad steel core: lower resistance, higher current capacity, lower weight and better corrosion resistance.

ASTM B549
ACSS

Aluminium Conductor Steel Supported

Annealed 1350-O aluminium over a galvanised steel core; conductivity about 63 % IACS. A high-temperature low-sag conductor that runs up to 250 °C without loss of strength or extra sag, against 80 °C for ACSR.

ASTM B856
AACSR

Aluminium Alloy Conductor Steel Reinforced

Like ACSR, with aluminium-alloy (Al-Mg-Si) wires instead of pure aluminium, giving higher rated strength.

ASTM B711
ACAR

Aluminium Conductor Alloy Reinforced

Aluminium-alloy core wires with 1350 aluminium outer layers; higher conductivity than ACSR. The alloy-to-aluminium ratio is chosen for the required strength and ampacity.

ASTM B524
Shield Wire

Shield / Earth Wire

Earth wire for safety and lightning protection on overhead lines, in aluminium-clad steel (AW) or galvanised steel (GA). AW gives higher conductivity, less corrosion and longer life.

ASTM B416 · ASTM B498 · BS EN 50182 · DIN 48201-3

Request a Quote

Send your requirement

Insulated conductors and cables

CCX / CCXH

Medium-Voltage Covered Conductor

Compact AAAC or ACSR/GA conductor with black XLPE insulation (CCX), or XLPE plus a black HDPE jacket (CCXH), for 20 kV and 33 kV lines. Operating 80 °C, short circuit 210 °C.

20 kV · 33 kV · XLPE / HDPE
ABC

Aerial Bundled Cable

XLPE-insulated aluminium phase conductors with neutral, lighting conductor and messenger; single-phase, 5-core and 6-core three-phase. Operating 90 °C, short circuit 250 °C.

0.6/1 kV · XLPE · HD 626
NAYY · NA2XY

Low-Voltage Power Cables

Solid, compact stranded or sector-shaped aluminium conductors with PVC or XLPE insulation; unarmoured, steel-tape armoured and wire armoured. From 1×10 to 3×300+150 mm².

IEC 60502-1 · 0.6/1 kV · NAYY · NA2XY · NAYBY · NA2XBY · NAYRY · NA2XRY

Need a price or data sheet for this product?

Request a quote